If you have an existing cloud-hosted project which you have been accessing from 4D Pro, OpenViewer, or Scheduler version 6.3 (2020) and are ready to upgrade to version 6.4 (2021.1), follow the directions below. Please read all directions before installing version 6.4.
NOTE: These instructions are only for upgrading existing 4D iModels in Control. If you are upgrading from SWP (6.2 or older), upgrading a private project .sp from any version, or starting a new project, follow the directions in Setting up a 4D Project in SYNCHRO Control and simply leave the version as 6.4 (default).
RECOMMENDED: Before installing SYNCHRO 4D Pro 6.4 a user with admin rights should consider opening any existing SYNCHRO Control projects in SYNCHRO 4D Pro version 6.3 and then select File > Save As to save a local copy of the project as an .SP file, in case user wants an .sp file in 6.3 as a backup. After this is done and you have your needed backup in 6.3, then 4D Pro version 6.4 may be installed. All users who will be accessing the cloud-hosted project from 4D Pro, OpenViewer, or Scheduler must be using the same version as set in SYNCHRO Control, so only upgrade the project version when all users are able to upgrade their SYNCHRO desktop products to the new version as well.
These steps must be performed by a user with administrative privileges for the project