10.02.00.43 August 2020

Known issues

• There is no upgrade path for user data.
  • New product versions do not support data from previous versions and no upgrade path is possible.
• Multi-users conflict resolution is not supported.
  • Cost code assignment and slicing operation conflicts are not handled and can result in incorrect data and geometry.
• Volume is not calculated for some Earthworks and Fill elements.
• Performance decline on bulk operations (above 1000) or when total assignments count is above 5000.
• Instant crashes possible especially on decent machines with huge models and intensive usage.
• Calculated volume of sliced components is different compared to the volume of the same components before the slice. It is usually smaller than 0.001% and should never be greater than 0.01%. Volume calculated before the slice is the correct one.
• Sometimes volume value is not calculated for one or two pieces of the sliced component, when the slice is performed on a curved or bent component
• Unit of measurement abbreviation in column "UOM" (in "Reporting" grid) does not change when calculated quantity is converted to another UOM using "Convert to" functionality. This issue is seen also in the exported CSV file.
• Order of assigned components is different in the "Reporting" grid and exported CSV file:
  • in the "Reporting" grid, components are not listed alphabetically .
  • in the exported CSV file, components are listed alphabetically.
• Order of assigned work-steps is different as well:
  • in the "Reporting" grid, work-steps are listed alphabetically. 
  • in the exported CSV file, work-steps are listed according to work step code.
• Order in Summary list is different as well:
  • in the "Summary" grid, work-steps are listed alphabetically. 
  • in the exported CSV file, work-steps are listed according to Total value.
• "Cannot install SYNCHRO Modeler. Construction Modeler is already installed." means that an older version of Construction Modeler product is installed on the machine. Uninstall the older version from Add/Remove programs. If it is missing there, it means that there are some leftover files in these two locations:   $LocalAppData\Programs\construction-modeler\*.* OR   $PROGRAMFILES64\Bentley\Construction Modeler\*.*. Remove any leftover files from these locations to install SYNCHRO Modeler.
• Alignments without placement cannot be focused.
• Split and hidden components are still associated with the work area when the area was created on such components.
• All search results are selected every time when navigate to Results widget.
• Sometimes work area boundaries are displayed outside the model after switching between views in Index page and zooming out/in.
• Imperial units are not supported in Assign by Query dialog.
• All items in Work Area widget became selected when navigate into widget after Find Similar has been executed.
• Failed to create Work Area issue might happen when SYNCHRO Modeler application was not fully closed previously. Close SYNCHRO Modeler, open Windows Task Manager and end task for SYNCHRO Modeler if it is running. Open SYNCHRO Modeler and create Work Area.
• Failed to split element issue might happen when SYNCHRO Modeler application was not fully closed previously. Close SYNCHRO Modeler, open Windows Task Manager and end task for SYNCHRO Modeler if it is running. Open SYNCHRO Modeler and split element.