Exporting to IFC from the Connect Portal

If you are viewing through https://connect.bentley.com, you will soon only be able to export to IFC from a saved view. A recent security fix resulted in exports through this portal to no longer be possible. However, if you wish to export the entire iModel to an IFC file from a named version, you can still do this by navigating to itwin.bentley.com.

Select your iModel and view it. Once you are able to view the iModel, click on Saved Views, then on the view you wish to export. Then click on the ... and select Export.

This brings up the IFC Export interface:

Optional Log file:

You can also optionally pick to have the log files copied to the same location as the generated IFC file by toggling "Save Logs"

IFC Format:

Select the IFC format. Currently supported formats are IFC 4.3, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

User defined Mapping

Optionally, you can select a custom mapping file to be used for the IFC Export. The default mapping file can be found here: Schema mapping.

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

  • Created by Bentley Colleague
  • When:
  • Last revision by Bentley Colleague
  • When:
  • Revisions: 8
  • Comments: 0
Recommended
Related