iTwin Portal IFC Exports

Aidas Vaiksnoras — Thu, 15 Dec 2022 15:48:21 GMT

Current Revision posted to Synchronization Wiki by Aidas Vaiksnoras on 12/15/2022 3:48:21 PM

Navigate to https://iTwin.bentley.com

Select your iTwin if you don’t see the iModel you want to export to IFC.

Once you have your iModel, you have two choices for where you can initiate IFC Exports.

Exports from iModel List

Once you see the iModel you want to export, click on the three dots. Select the Export to IFC menu item.

This brings up the Export to IFC dialogue.

Export based on Saved View:

Toggle the "Filter based on Saved View" to create the IFC export based not on the entire iModel, but based on one of the saved views defined in Design Review. This can result in a much smaller IFC file which can be particularly useful on very large models.

Exports from Saved View in Design Review

Alternatively, Exports can be triggered from any saved view. First bring up the Saved Views dialogue and click on the ... of an individual view. This brings up the following view:

Select Export.

In this case, there is no selection of views as the export will be based on the saved view that was selected to bring up the export menu.

Common Options

Optional Log file:

You can also optionally pick to have the log files copied to the same location as the generated IFC file by toggling "Save Logs"

IFC Format:

Select the IFC format. Currently supported formats are IFC 4.3 RC1, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

User defined Mapping

Optionally, you can select a custom mapping file to be used for the IFC Export. A base mapping file can be found here:

Schema mapping

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

Tags: IFC, IFC export

iTwin Portal IFC Exports

TimLawrence — Wed, 17 Aug 2022 16:09:39 GMT

Revision 9 posted to Synchronization Wiki by TimLawrence on 8/17/2022 4:09:39 PM

Navigate to https://iTwin.bentley.com

Select your project if you don’t see the iModel you want to export to IFC.

Once you have your iModel, you have two choices for where you can initiate IFC Exports.

Exports from iModel List

Once you see the iModel you want to export, click on the three dots. Select the Export to IFC menu item.

This brings up the Export to IFC dialogue.

Export based on Saved View:

Exports from Saved View in Design Review

Alternatively, Exports can be triggered from any saved view. First bring up the Saved Views dialogue and click on the ... of an individual view. This brings up the following view:

Select Export.

In this case, there is no selection of views as the export will be based on the saved view that was selected to bring up the export menu.

Common Options

Optional Log file:

You can also optionally pick to have the log files copied to the same location as the generated IFC file by toggling "Save Logs"

IFC Format:

Select the IFC format. Currently supported formats are IFC 4.3 RC1, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

User defined Mapping

Optionally, you can select a custom mapping file to be used for the IFC Export. A base mapping file can be found here:

Schema mapping

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

Tags: IFC, IFC export

iTwin Portal IFC Exports

TimLawrence — Fri, 08 Apr 2022 19:50:02 GMT

Revision 8 posted to Synchronization Wiki by TimLawrence on 4/8/2022 7:50:02 PM

Navigate to https://iTwin.bentley.com

Select your project if you don’t see the iModel you want to export to IFC.

Once you have your iModel, you have two choices for where you can initiate IFC Exports.

Exports from iModel List

Once you see the iModel you want to export, click on the three dots. Select the Export to IFC menu item.

This brings up the Export to IFC dialogue.

Export based on Saved View:

Exports from Saved View in Design Review

Alternatively, Exports can be triggered from any saved view. First bring up the Saved Views dialogue and click on the ... of an individual view. This brings up the following view:

Select Export.

In this case, there is no selection of views as the export will be based on the saved view that was selected to bring up the export menu.

Common Options

Optional Log file:

You can also optionally pick to have the log files copied to the same location as the generated IFC file by toggling "Save Logs"

IFC Format:

Select the IFC format. Currently supported formats are IFC 4.3 RC1, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

User defined Mapping

Optionally, you can select a custom mapping file to be used for the IFC Export. A base mapping file can be found here:

SchemaMapping.json

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

Tags: IFC, IFC export

iTwin Portal IFC Exports

TimLawrence — Mon, 27 Sep 2021 19:30:52 GMT

Revision 7 posted to Synchronization Wiki by TimLawrence on 9/27/2021 7:30:52 PM

Navigate to https://iTwin.bentley.com

Select your project if you don’t see the iModel you want to export to IFC.

Once you have your iModel, you have two choices for where you can initiate IFC Exports.

Exports from iModel List

Once you see the iModel you want to export, click on the three dots. Select the Export to IFC menu item.

This brings up the Export to IFC dialogue.

Export based on Saved View:

Exports from Saved View in Design Review

Alternatively, Exports can be triggered from any saved view. First bring up the Saved Views dialogue and click on the ... of an individual view. This brings up the following view:

Select Export.

In this case, there is no selection of views as the export will be based on the saved view that was selected to bring up the export menu.

Common Options

Optional Log file:

You can also optionally pick to have the log files copied to the same location as the generated IFC file by toggling "Save Logs"

IFC Format:

Select the IFC format. Currently supported formats are IFC 4.3 RC1, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

User defined Mapping

Optionally, you can select a custom mapping file to be used for the IFC Export. A base mapping file can be found here:

SchemaMapping.json

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

Tags: IFC, IFC export

iTwin Portal IFC Exports

TimLawrence — Fri, 24 Sep 2021 20:42:57 GMT

Revision 6 posted to Synchronization Wiki by TimLawrence on 9/24/2021 8:42:57 PM

Navigate to https://iTwin.bentley.com

Select your project if you don’t see the iModel you want to export to IFC.

Once you have your iModel, you have two choices for where you can initiate IFC Exports.

Exports from iModel List

Once you see the iModel you want to export, click on the three dots. Select the Export to IFC menu item.

This brings up the Export to IFC dialogue.

Export based on Saved View:

Exports from Saved View in Design Review

Alternatively, Exports can be triggered from any saved view. First bring up the Saved Views dialogue and click on the ... of an individual view. This brings up the following view:

Select Export.

In this case, there is no selection of views as the export will be based on the saved view that was selected to bring up the export menu.

Common Options

Optional Log file:

You can also optionally pick to have the log files copied to the same location as the generated IFC file by toggling "Save Logs"

IFC Format:

Select the IFC format. Currently supported formats are IFC 4.3 RC1, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

User defined Mapping

Optionally, you can select a custom mapping file to be used for the IFC Export. A base mapping file can be found here:

SchemaMapping.json

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

Tags: IFC, IFC export

Exporting to IFC from iTwin Portal

TimLawrence — Fri, 24 Sep 2021 20:38:48 GMT

Revision 5 posted to Synchronization Wiki by TimLawrence on 9/24/2021 8:38:48 PM

iTwin Portal IFC Exports

Navigate to https://iTwin.bentley.com

Select your project if you don’t see the iModel you want to export to IFC.

Once you have your iModel, you have 2 choices for where you can initiate IFC Exports.

Exports from iModel List

Once you see the iModel you want to export, click on the three dots. Select the Export to IFC menu item.

This brings up the Export to IFC dialogue.

Export based on Saved View:

Exports from Saved View in Design Review

Alternatively, Exports can be triggered from any saved view. First bring up the Saved Views dialogue and click on the ... of an individual view. This brings up the following view:

Select Export.

In this case, there is no selection of views as the export will be based on the saved view that was selected to bring up the export menu.

Options

Optional Log file:

You can also optionally pick to have the log files copied to the same location as the generated IFC file by toggling "Save Logs"

IFC Format:

Select the IFC format. Currently supported formats are IFC 4.3 RC1, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

User defined Mapping

Optionally, you can select a custom mapping file to be used for the IFC Export. A base mapping file can be found here:

SchemaMapping.json

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

Tags: IFC, IFC export

Exporting to IFC from iTwin Portal

TimLawrence — Thu, 16 Sep 2021 02:07:42 GMT

Revision 4 posted to Synchronization Wiki by TimLawrence on 9/16/2021 2:07:42 AM

iTwin Portal

Navigate to https://iTwin.bentley.com

Select your project if you don’t see the iModel you want to export to IFC.

Once you see the iModel you want to export, click on the three dots. Select the Export to IFC menu item. This brings up the Export to IFC dialogue.

Select a folder for the IFC file. These folders are located on Share for this project.

IFC Format:

Select the IFC format. Currently supported formats are IFC 4.3 RC1, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

User defined Mapping

Optionally, you can select a custom mapping file to be used for the IFC Export. A base mapping file can be found here:

SchemaMapping.json

Export based on Saved View:

Optional Log file:

You can also optionally pick to have the log files copied to the same location as the generated IFC file by toggling "Save Logs"

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

Tags: IFC, IFC export

Exporting to IFC from iTwin Portal

TimLawrence — Thu, 16 Sep 2021 01:46:20 GMT

Revision 3 posted to Synchronization Wiki by TimLawrence on 9/16/2021 1:46:20 AM

iTwin Portal

Navigate to https://iTwin.bentley.com

Select your project if you don’t see the iModel you want to export to IFC.

Once you see the iModel you want to export, click on the three dots. Select the Export to IFC menu item. This brings up the Export to IFC dialogue.

Select a folder for the IFC file. These folders are located on Share for this project.

Select the IFC format. Currently supported formats are IFC 4.3 RC1, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

Optionally, you can select a custom mapping file to be used for the IFC Export. A base mapping file can be found here:

SchemaMapping.json

You can also optionally pick to have the log files copied to the same location as the generated IFC file.

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

Tags: IFC, IFC export

Exporting to IFC from iTwin Portal

TimLawrence — Wed, 15 Sep 2021 19:09:24 GMT

Revision 2 posted to Synchronization Wiki by TimLawrence on 9/15/2021 7:09:24 PM

iTwin Portal

Navigate to https://iTwin.bentley.com

Select your project if you don’t see the iModel you want to export to IFC.

Once you see the iModel you want to export, click on the three dots. Select the Export to IFC menu item. This brings up the Export to IFC dialogue.

Select a folder for the IFC file. These folders are located on Share for this project.

Select the IFC format. Currently supported formats are IFC 4.3 RC1, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

Optionally, you can select a custom mapping file to be used for the IFC Export. A base mapping file can be found here:

SchemaMapping.json

You can also optionally pick to have the log files copied to the same location as the generated IFC file.

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

Tags: IFC, IFC export

Exporting to IFC from iTwin Portal

TimLawrence — Wed, 15 Sep 2021 19:08:00 GMT

Revision 1 posted to Synchronization Wiki by TimLawrence on 9/15/2021 7:08:00 PM

iTwin Portal

Navigate to https://iTwin.bentley.com

Select your project if you don’t see the iModel you want to export to IFC.

Once you see the iModel you want to export, click on the three dots. Select the Export to IFC menu item. This brings up the Export to IFC dialogue.

Select a folder for the IFC file. These folders are located on Share for this project.

Select the IFC format. Currently supported formats are IFC 4.3 RC1, IFC 2X3, IFC4 RV 1.2 and IFC 2X3 CV 2.0.

Optionally, you can select a custom mapping file to be used for the IFC Export. A base mapping file can be found here:

SchemaMapping.json

You can also optionally pick to have the log files copied to the same location as the generated IFC file.

Once you click on Export, a message will appear near the top of the window:

You will receive an email once the IFC file has been generated. Go to the Project Share and download the file.

Tags: IFC, IFC export