You are currently reviewing an older revision of this page.
How to update device tags to fit the "Schematic (PLC wired device ID)" and "Schematic (PLC wired Terminal ID)" display formats specified in Options > Project Options.
After wiring the devices and terminal blocks to the PLC symbol(s), select Review/Revise > *Replace > Replace Device ID.
Clear the "Device Tag" check box.
Set the "Apply Schematic (PLC wired device ID) format" option and/or the "Apply Schematic (PLC wired Terminal ID) format" check boxes.
Set the "Search" scope appropriately.
Select OK.
Select OK on the "This will renumber all IDs, are you sure you want to do this?" prompt box.
Keywords: device tags of PLC wired devices are wrong, symbols, wiresP/S: 51159, 500000074933