Bentley Communities
Site
Search
User
Site
Search
User
Product Communities
OpenPlant | AutoPLANT
OpenPlant | AutoPLANT Wiki
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 3 (10.03.00.25)
Sign In
-
OpenPlant | AutoPLANT Wiki
+
OpenPlant
+
Bentley AutoPLANT
+
Bentley Navigator
+
Bentley PlantSpace
+
Plant Project Tools
-
Bentley Raceway and Cable Management
How to Download Bentley Raceway and Cable Management
Bentley Raceway and Cable Management Product Compatibility
-
CONNECT Edition - Bentley Raceway and Cable Management
-
Resolved issues in Bentley Raceway and Cable Management Releases
Resolved issues in Bentley Raceway and Cable Management CONNECT Update 1, 10.01.00.21
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 2 (10.02.00.25)
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 3 (10.03.00.25)
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 4 (10.04.00.31)
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 5 (10.05.00.54)
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 9 (10.09.00.74)
Resolved issues in Bentley Raceway and Cable Management CONNECT Update 9 (10.09.01.18)
Resolved issues in Bentley Raceway and Cable Management CONNECT Edition, 10.00.00.127
Resolved issues in Bentley Raceway and Cable Management CONNECT Update 10 (10.10.00.71)
Resolved issues in Bentley Raceway and Cable Management CONNECT Update 11 (10.11.00.222)
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 11 (10.11.01.144)
+
What's New in Bentley Raceway and Cable Management Releases
+
Manufacturer Based Raceway Content in Bentley Raceway and Cable Management
+
AutoPlace Conduit tool - BRCM CONNECT Edition
+
Cable Reports- Cable Pull Cards and Cable Drums-Bentley Raceway and Cable Management CONNECT Edition
+
Cable Routing-Bentley Raceway and Cable Management CONNECT Edition.
+
Drawing generation - Bentley Raceway and Cable Management CONNECT Edition
+
i-Model - Bentley Raceway and Cable Management CONNECT Edition
+
Installation_Configuration - BRCM CONNECT
+
Power Platform Support - BRCM CONNECT Edition
+
Project Setup- Bentley Raceway and Cable Management
+
ProjectWise Integration - Bentley Raceway and Cable Management CONNECT
+
Raceway Design Tools - Bentley Raceway & Cable Management
+
Raceway IDs - Bentley Raceway and Cable Management CONNECT
+
Reports - Output Manager - BRCM CONNECT Edition
+
Underground System - Bentley Raceway and Cable Management CONNECT Edition
+
User Defined Attributes (UDA) Settings - Bentley Raceway and Cable Management CONNECT Edition
+
Components Center - Bentley Raceway and Cable Management CONNECT Edition
+
i-Twin Services-Bentley Raceway and Cable Management CONNECT Edition.
+
Equipment & Cable List Import-Bentley Raceway and Cable Management CONNECT.
+
Interoperability
BRCM Update 11 To Save Database in PlantSight
How to Change Default Categories Order in Element Information Dialog in OPPID CE
How to Change the Color of the Raceway's Level
How To Configure BRCM Raceway Labels
How To Place Parametric Supports on Raceways
How to Publish iModels in BRCM
How To Route BRCM Concrete Trench
To Import an iModel in BRCM Update 11
To Resolve Finding and Deleting Hidden Cable Trays not visible in dgn and nor can be found via selection tools in BRCM
To Resolve Review Differences dialog not showing for iModel Import workflow
+
V8i - Bentley Raceway and Cable Management
i-model Composition Service for S3D
Working from home with OpenPlant
Working from home with Bentley Raceway and Cable Management
Working from home with AutoPLANT Modeler
Your Feedback is important to us!
Learning Content for OpenPlant
Questions about this article, topic, or product? Click here.
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 3 (10.03.00.25)
ID
Description
390057
The Cable Sizing function executes the change process even though the feature was cancelled.
473423
After creating a detailed cable info section cut the table will reflect the routed cables, but if you remove the routed cables and attempt to update this section cut the table will still list the previously routed cables.
629813
We improved the performance of stretching duct bank concrete.
629820
We improved the performance of the key in “rcmfixductbanknamedgroups.”
660682
The trench Route could not connect properly after deleting a trench tee using the ‘Delete Trench’ button.
660695
The Trench route could not connect properly after moving a trench crossover using the modify trench command.
1036777
When placing equipment from the Equipment Manager, if you changed the insertion point for the equipment it would disappear from the current view and you had to search for the equipment. Now the equipment position should remain within the view.
1038562
The cable list importing process did not allow you to enter an "Underscore" for separating the Panel ID and the terminal connection.
1041017
The tee fittings in the standard BRCM_PLANT_US_COMP example project did not display a bend radius when you viewed the properties on the fittings.
1037932
The Insert Raceway Part feature was not previewing the part at the cursor.
809117
If multiple hatches are defined In the Options CAD Standards> Hatches then no hatch was applied when creating a 2D raceway extraction.
1051380
The Connect function in ductbank Router dialog cannot be used when ductbank is non-orthogonal
865428
While Routing Cable Tray where the Raceway has a Y offset and then Place Part is done for two Custom Vertical Bends the BRCM Software Crashes.
927190
When routing a conduit and placing a Tee with ‘left/right direction’ the conduit that continued on the other side of the Tee was at an angle rather than aligned with the Tee.
965627
The BOQ of Cable Tray filtered the Tray according to the Drawing Reference for the raceway, but the filtering applied to the Tray only and not the accessories like the Tray Cover and Divider. The details for the raceway cover and divider were listed together with no Drawing Reference Filter.
1022338
Annotation scale for the text in section graphics did not work properly.
1032344
Copying Duct Bank copied the Manhole or Equipment along with it and the ID for copied Manhole or Equipment could not be edited.
1034328
An error occurred saving UDAs when you set # PW_DISABLE_INTEGRATION_FROM_DESKTOP=1 in pw.cfg file for ProjectWise integration.
956663
The Weight of cable on drums can exceed the drum's specified Load.
1031130
If a Duct Bank design was split across two separate files the Detail_Envelope_BOQ report would not report the IDs.
1035395
In the Equipment Manager dialog if the user changed the dimensions of an equipment and saved it as a configuration it would be lost after the Equipment Manager was closed and reopened.
923570
Various commands in the Manage ribbon menu were not displaying command prompts and would display useless Tool settings dialog boxes. Now these tools have proper prompts and unnecessary dialog boxes are no longer displayed.
923565
Various commands in the Equipment & Cable ribbon menu were not displaying command prompts and would display useless Tool settings dialog boxes. Now these tools have proper prompts and unnecessary dialog boxes are no longer displayed.
923569
Various commands in the Output ribbon menu were not displaying command prompts and would display useless Tool settings dialog boxes. Now these tools have proper prompts and unnecessary dialog boxes are no longer displayed.
923566
Various commands in the Raceway ribbon menu were not displaying command prompts and would display useless Tool settings dialog boxes. Now these tools have proper prompts and unnecessary dialog boxes are no longer displayed.
923567
Various commands in the Underground System ribbon menu were not displaying command prompts and would display useless Tool settings dialog boxes. Now these tools have proper prompts and unnecessary dialog boxes are no longer displayed.
923571
Various commands in the Modify contextual ribbon menu were not displaying command prompts and would display useless Tool settings dialog boxes. Now these tools have proper prompts and unnecessary dialog boxes are no longer displayed.
948230
The Raceway properties were always displaying the units in inches even when using a metric project.
949623
The Edit Text command was added to the "Common Tools" panel group in the ribbon menu tabs for "Equipment & Cable," 'Raceway," "underground System," and "2D Extraction."
1012968
The MicroStation "Position Mapping" feature was not enabled in Bentley Raceway and Cable Management. Now the feature has been enabled and the settings can be found in File >> Setting >> User >> Preference.
1045126
The Bend Radius for T-fitting was 0.0000 in the sample WorkSet BRCM_PLANT_US_WIP.
1056107
The Create New Raceway Catalog dialog text controls overlapped each other when Windows scaling size was set to 125% or greater.
965878
The Place Equipment tab would flash while clicking the Create/Modify Equipment command.
983286
The published i-model could not display the BRCM raceway / device data in the Element Information dialog in Navigator.
1030765
When creating a section in a particular project in the Section Properties dialog, selecting the RWLabel.xml file and then selecting OK crashed the software.
1030685
In certain circumstances, the Raceway properties were not listed in the Properties dialog until you closed and reopened the page.
1037198
The help buttons failed to open the proper help topic in the Options > Cable Data > 3D Cable Levels >and the Options > Cable Routing > Cable Laying Methods dialog boxes.
1041063
When doing a Cable List Import from Excel, if you selected the Configuration button and mapped another field and saved that, but then went back into the configuration and removed this mapping it would still remember the previous mapping.
1033355
The software crashes when you attempted to copy/move/stretch ductbank with a manhole using the Modify Ductbank tool in a particular file.
1032472
Trench supports disappeared after extending the trench.
1028403
I the Options > Cable Data if you do an import of a Cable Types and modify the XML mapping file the software failed to save your mapping changes.
1030489
In the Raceway Routing dialog the segment label was not correct if setting a Start value=001. The first segment number should be 001 and not 1.
1031930
In the Auto Routing Entry Points dialog of the Cable Manager, the Visualize command zoom factor is not appropriate making it difficult to see the drawing as needed.
1034591
When an equipment list is imported and an additional column added to define equipment name, that selection is not saved in the XML file.
1034412
Duct bank concrete disappeared after using the Edit Manhole tool.
1036915
Using Insert Part and selecting a raceway and then closing the dialog without placing a part left the routing dialog open and if you tried to switch to the Element Selection tool it would crash the software.
1036128
In the COMOS_SAMPLE WorkSet some raceways had incorrect properties which caused the 3D Cable visualization to generate improper cable routes.
1037934
The Insert Raceway Part feature was not previewing the part at the cursor.
1037935
The Insert Raceway Part feature was not previewing the part at the cursor.
1047501
The file “CFG_UDAs.XML” was overwritten when upgrading datasets from V8i to BRCM CONNECT, so any custom fields were lost.
1051944
When you publish an Imperial DGN to an i-model the details of the raceway present in the i-model the dimension units for the Trade Width and Trade Height values are shown in Metric units.
1053220
Duct Bank Stretch command doesn't move the horizontal concrete bend correctly.
1053323
When publishing an i-model for a DGN which has Custom Raceway & Schemas the custom fields are not shown in the i-model as can be seen in BRCM Element Properties.
1055808
Define a new Raceway System for a catalog and then route raceway from this new system. If you then tried to use the Resize Raceway feature on this raceway the software would crash.
CONNECT Edition
10.03.00.25
bentley raceway and cable management
Resolved Issues
Share
History
More
Cancel
Created by
Scott Walker
When:
Mon, Oct 14 2019 2:14 PM
Last revision by
Scott Walker
When:
Tue, Jan 9 2024 12:56 PM
Revisions:
3
Comments:
0
Recommended
Related