distances measured on dgn modified warp

ttps://translate.google.it/

good morning
in Bentley Map often use the warp command
to adapt the topographic survey to the cadastral plan.

this command with the option Stretch changes the dgn.

When I measure on the original topographic survey(see attached dgn tr3_originale)  the distance of a point from an object (in this case a tube axis in the project) I get a measure.

when I measure on the drawing ( see attached dgn  tr3_warp.dgn) modified get another measure.

the warp command does the calculations.


My question is:

you can have the transformation parameters
and with a macro MVBA make sure that the measurement made on the dgn modified with warp returns the real measurement of the survey

or any idea?

I apologize for my poor english
I hope I explainedmisure.zip

Parents Reply Children
No Data