distances measured on dgn modified warp


good morning
in Bentley Map often use the warp command
to adapt the topographic survey to the cadastral plan.

this command with the option Stretch changes the dgn.

When I measure on the original topographic survey(see attached dgn tr3_originale)  the distance of a point from an object (in this case a tube axis in the project) I get a measure.

when I measure on the drawing ( see attached dgn  tr3_warp.dgn) modified get another measure.

the warp command does the calculations.

My question is:

you can have the transformation parameters
and with a macro MVBA make sure that the measurement made on the dgn modified with warp returns the real measurement of the survey

or any idea?

I apologize for my poor english
I hope I explainedmisure.zip