How to set Cell Feature's Scale Value?

Re: How to set Cell Feature's Scale Value?

cdalesandro — Fri, 06 Feb 2009 18:05:59 GMT

sphinxo:

In the Symbology Panel, I set the CellXScale value to "1.0",But when i Insert the cell .why is the cell's x scale 4800?

In Cell Symbology panel, do you have "ApplyDrawingScale" toggled on or are you using "OverrideScale"?

Regards,

Chris

Re: How to set Cell Feature's Scale Value?

sphinxo — Fri, 06 Feb 2009 08:40:16 GMT

Thank you Jerry!

I use the xft.PlacePointOp Object, So it can not return the feature's geometry before call the fucntion "PlacePointOp .AddFeatureToGenerate".

Re: How to set Cell Feature's Scale Value?

cdalesandro — Thu, 05 Feb 2009 18:49:48 GMT

There is no way to set the scale in the CellParams object. Set your scale in the Feature Definition's Symbology in your schema. If you want to further scale the feature after placement, then you can use xft.ScaleOp. For examples of ScaleOp, search Map\vba\xfmStdOpsLib.mvba. In geo_example_designer, the Tree feature's placement method performs a placement operation immediately followed by a scale operation.

Regards,

Chris

Re: How to set Cell Feature's Scale Value?

Jerry Walter - Bentley — Thu, 05 Feb 2009 18:29:07 GMT

I personally have not tried this but what about using the xft.feature.geometry object. This returns a Microstation Element object.

HTH

Jerry