Printing seems to ignore the MAP Manager display order in Open Cities

It appears that the display order is not being honoured, but labels and user defined symbology is fine.  I've filed this as Defect 1039817.  At this time, the workaround is to print from Map V8i.  Note that OpenCities Map Update 4  is currently in development, but once released, you can use the Export to MicroStation tool and print the resulting model.  The export tool, exports the set-up in the Map Manager.   Thank you for reporting this issue.

It appears that the display order is not being honoured, but labels and user defined symbology is fine.  I've filed this as Defect 1039817.  At this time, the workaround is to print from Map V8i.  Note that OpenCities Map Update 4  is currently in development, but once released, you can use the Export to MicroStation tool and print the resulting model.  The export tool, exports the set-up in the Map Manager.   Thank you for reporting this issue.

To clip and mask a reference at the same time, use a group hole. The outside element will be the clipping element while the inside element(s) will be the mask(s).

AskInga Tip #689

Hi Inga

I want to so the opposite clip to this...keeping the data that is inside the holes...can this be done?

Kimba62,

Inga retired earlier this year, after a long and successful career with Bentley Systems.

I tried a few tests to see how the clip-void might be accomplished, but did not find the solution.  And a reply to an original question cannot be moved without moving the entire Post, so I would ask that you ask this question on the MicroStation Forum so that more colleagues and Users can see it and perhaps offer some suggestions.