I would like to make a parallel copy of a line which was digitized in 3D. I want to keep heights and move the line only in XY plane (top view).
When I use function Move Parallel I am not able to make a copy, or the copy of a line is moved in the Z direction with wrong XY distance .
Is there any way to block the z-axis and make a parallel copy in the top view?
Thanks for Help
By using AccuDraw drawing aids tool, you will be able to move/copy in the direction and in the plan you wanted.
To learn more about AccuDraw, please read help section about it: Working with AccuDrawI hope that helps.Sebastien Lefrancois
Thank you for your answer, unfortunately there must be something more than that.
I managed to make a copy by setting AccuDraw to top view but the height is different.
Hi Katarzyna,Ok. You may use Copy/Move tool instead. It should keep the z by following the same steps above.Sebastien
It look like there is an issue in microstation, someone had similar question in 201 https://communities.bentley.com/products/building/building_analysis___design/f/aecosim-speedikon-forum/137655/offsetting-3d-lines/416904#416904