Hi all!
After select tool Create Shapes. I select Associate Linkages, but The Associate Linkages tool settings window don't opens. Why? And don't message box.
I cretaed fence, shape and centroid.
I already connect to OLEDB.
Thanks!
...what versions of MicroStation and Bentley Map are you running?
Regards,
Jeff Bielefeld [Bentley]
Hello Jeff
I'm running version MS v8i and Bently Map V8i.
Thank you Jeff.
But I am running V8i, I tried again, but not do. Someone help me.
Thanks
Can you send me a sample piece of the data along with the database, if it is not too big ???
Thanks !
Jerry
Also, is the associate linkages form listed in the Windws pulldown, in the main Microstation window ? Sometimes these forms get moved to some out of the way place, and can not be readily seen ( I have personally done this and get quite frustrated also). It may be opened, but you can not see it.
HTH
Jerry!
Ok . I post up file .xfm and file .dgn.
thanks!
Thanks for the data. I will pull it down and look at it.
Thanks, Jerry.
You feedback to me, soon. Thanks.
Hero VN
I am sorry, but I do not use rar files. Can you place this is n zip file ?
Tx
Herovn;
I have looked at your drawing. There seems to be some missing parts with respect to the Associate Linkages.
I suspect you have a database with the drawing. If you do not, then, this will not work. What the tool is doing is taking a database linkage and copying it to an associated piece(s) of graphics. This association is either a centroid of the shape/boundary or the shape/boundary for a centroid.
Once you have that aset up, then you can use the tool to associate the linkages. To use the tool, you must define a fence of the aear where you want associate. Then you start up the tool. If you do not have a fence active, then the tool will not activate and you will be prompted in the status field that you need to have a fence active.
Jerry. Thank you.
You said "some missing parts with respect to the Associate Linkages". Are there missing? Can you give me a project demo?
Thank you very much.