Map Models - Refererence disappear

Re: Map Models - Refererence disappear

Jerry Walter - Bentley — Thu, 18 Feb 2010 19:41:24 GMT

Are the reference file elements features of the Geospatial project that you have active ? If so, do these features have a min and/or max scale value ? I have ran into this before and it looks like the reference files are being turned off, but the features have a min/max scale factor that is causing these to disappear. Just a though ......

Jerry

Re: Map Models - Refererence disappear

bbrenki — Thu, 18 Feb 2010 05:28:45 GMT

Yes, original "Default" model attachment is displayed. Also, when I reopen the file all attachments are displayed until I try to move them.

Re: Map Models - Refererence disappear

Jeff Bielefeld — Wed, 17 Feb 2010 22:47:38 GMT

...after moving one of the additional "Default" model reference attachments, does performing "Save Settings" and entering "newfile" at the uStn> command prompt temporarily display your original "Default" model attachment? FWIW the "Map Manager" "is designed" to work with any models from the active design file or unattached ones as well. I think you may have uncovered a situation where duplicate attachments of the same model are not properly handled. Your test may help confirm this.

Regards,

Jeff Bielefeld [Bentley]

Re: Map Models - Refererence disappear

aarrjeeli_001 — Wed, 17 Feb 2010 05:49:32 GMT

Try detach everything and reference back again and check also the levels if evrything are on, if that happens again I think there is something wrong with some of your configuration.

hope this help.