Problem publishing tdpr Raster.

Offline xin tan over 8 years ago

After publish data to BGWP, some raster data create a black stripe at certain zoom level.

Have anyone encountered anything like this?

Parents

0 Offline CMartins Wed, Aug 19 2015 4:14 AM
Hello Xin,

I saw an issue where a specific raster tile (tif format) was partially displayed, it had a black square covering part of the image, something that looks similar to this case. What made a difference in that case given that it was specific to one of the images was to recreate the raster image. I would suggest you to test this option, use MicroStation, open a DGN and attach the image from the Raster Manager. Then then do a ‘save as…’ to create the new image, use it to replace the old one and recreate the tRaster layer (or just create a tRaster test layer with this single image) to see if it makes a difference.

Regards
Carlos
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline xin tan Wed, Aug 19 2015 9:57 AM in reply to CMartins

Hi,

After attaching the raster to dgn file, I got the same result when zoom in and out. part of the image disappear.

I tried to "save as" new file, but Microstation crash immediately.

I checked log file of the itiff conversion process using ImageConverter, it shows "R001 - Internal error".

I guess the conversion crashed somehow, only part of the image was rendered.

/Xin
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline CMartins Thu, Aug 20 2015 4:20 AM in reply to xin tan
Hi Xin,

It looks like the raster is corrupted, that is the case when the ImageConverter fails to convert the raster. Are you able to display the raster correctly with any other application?

Regards,
Carlos
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Offline CMartins Thu, Aug 20 2015 4:20 AM in reply to xin tan
Hi Xin,

It looks like the raster is corrupted, that is the case when the ImageConverter fails to convert the raster. Are you able to display the raster correctly with any other application?

Regards,
Carlos
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

0 Offline xin tan Fri, Aug 21 2015 9:15 AM in reply to CMartins

Hi,

When I change conversion option from TrueColor24 to Grayscale1, it fixed some of the files and there is no error log anymore.
However, for some files, it worked partially, which means with TrueColor24 , I see black area at two zoom level, with Grayscale1 only one zoom level is covered in black. And in this case, no error was reported, which is also a problem.

/Xin
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline CMartins Tue, Aug 25 2015 4:31 AM in reply to xin tan
Hi Xin,

Would it be possible to provide us the original raster (the one seen in the screen shot above), so we can have a look at it and see if there is anything we can do.

Thanks
Carlos
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline xin tan Tue, Aug 25 2015 10:20 AM in reply to CMartins

FEL.rar
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline CMartins Fri, Aug 28 2015 4:01 AM in reply to xin tan
Hello Xin,

Thanks for sending it. I tested it and had no problems displaying the raster (zooming in/out) and saving as from the Raster Manager in MicroStation. Perhaps I have the wrong file?

Regards
Carlos
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline xin tan Fri, Aug 28 2015 5:09 AM in reply to CMartins

Hi,

I tried also to attach *.cal file in Microstation, there is no problem with zoom.

The problem is after conversion from *.cal to *.itiff.

I tried both with ImageConverter and Save as in Microstation, itiff results from both conversion have problem with zoom.

I have attached the itiff file and the script for conversion.

6404.FEL.rar
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel