Problem with Engineering link & GWP

I add Engineering link to the text in Microstation (SS3 08.11..09.459) and publish file to the Web GIS by GWP (SS4 08.11.11.16) and have problem:

links in GIS Web browser are wrong, for example I add 5 links and all links are mixed with each other. It happens weeek or two ago, I add links very often and before this time everything was OK.

I try to change layer, text style, delete all references, but result is same...

Parents Reply
  • Seems very likely that this issue is specific to that DGN, I had already checked the examples referred and the behavior there is correct.

    I am not aware if there (or what) is a limit to the number of engineering links that can be converted to iDPR (expecting that the e-links in MicroStation are kept intact after you add new ones and exit the session). We’ll find that and inform you.

    Thanks



Children
  • Our development informed that there should not exist any limitation in the code and there is no known limitation as far as we are aware.

    The problem could be link itself but I think you tested the same one in a different file? You could post the file here and we could have a look at it, alternatively if your preference is to keep the data more private we can file a new SR specifically for this issue.



  • I create file only with needed objects and mark by red circle the problem links

    Links are local, You can't see the result, but can see that end of link are wrong.

    For examle: 

    KTK Tallinna 8a must be - Data/AJskeem/Album_KTK/Sillamae/Tallinna/Tallinna_8a.pdf but really in web I see - Data/AJskeem/Album_KTK/Narva/Puskini/Puskini_2.pdf

    ktk.dgn
  • I can replicate the behavior and have filed a file specific Defect (107721) for further investigation.

    Unfortunately I don’t have a solution at the moment. It isn’t clear if this is a limitation, in theory it shouldn’t be but it seems to happen. It could be also caused by something else in the file, perhaps a specific element is causing a problem...

    I tested to copy all the elements into a brand new file but that didn’t help. At a certain stage I deleted a number of elements and then it started to work correctly but that does not clarify.

    Regards

    Carlos