I would like to simulate the movement of heavy truck its weight is 45 tons over a soft soil layer , I used the moving point load , I put in the path and the required information to carry out the analysis , but unfortunately I could not see the load move over the soil as you shown in your video , please advise how to show the results . I mean the movement of the load over the path.
Dear Muhamad,
It is difficult to say what went wrong with the setting of the moving load. To be able to check your model, please submit a service request following the link below:
https://apps.bentley.com/srmanager/ProductSupport
One of our support engineers will be able to assist you.
Ok, many thanks stefanos !