Hello everybody,
I am trying to reproduce oedometer and triaxial test with Plaxis 2D, and when I select mm units, the strains results are not accurate; for instance, a 25 mm tall specimen subjected to loads up to 800 kPa shows a maximum vertical strain of 6,4*10^-7. Also, the stress shown on "curves tool" are inexplicably high, i.e ( 118096 kPa).
This situation does not happen when I model with a metric sample i.e (1x1 m), then, results are "normal".
Could somebody help me please?
Dear Daniel,
You should be able to access the Service Request Manager now.
The issue was the fact that your account was not affiliated (linked) to the Univesity account. Typically this is handled by your local (site) administrator, IT manager, as explained in step 6 in my previous message.
I will create your first service request and send you some extra information about your account.
But I am already registered and logged.
That is what it appears when I try it out
The link seems to be active. What error do you get when trying to reach the page?
Do you have a Bentley account? Maybe that is the reason why. Here is the information to follow:
To start with, you need to create a Bentley profile (user account). The profile needs to be affiliated to the company or organization you work for. Typically, an IT manager can perform the action of adding any user to the company or organization group.
The full procedure requires that you follow the steps below:
Useful links:
Thank you very much. That link does not work. Where could I submit that service?