Hi all, Rushan Gizzatullin Dennis Waterman Stefanos Papavasileiou
I have watched webinar regarding errors and i'm still find difficulty to find the reasons for the Load advancement procedure fails. [Error code: 103] (eventhough looking incremental, strain and plastic points plots). You all have many year experiences in this field and i need your advices (tips and tricks) to find how to identify the errors easily (with example is more appreciable)?
Hope i will receive good knowledge from you all.
Thanks.
Dear Nitha,
In order to find out what the mechanism for failure is, and so possibly determining the cause, these Output plots should be inspected:
A combination of these plots will usually give insight into what is happening.
Please submit a service request for further assistance: https://apps.bentley.com/srmanager/ProductSupport
Dear Mr. Rushan,
Noted with thanks.
Dear Nitha NN,
Thank you for the feedback.
If you checked the mentioned parameters, I think that the best way is to submit a service request:https://apps.bentley.com/srmanager/ProductSupportI can suggest to refine the mesh, change element activations on the phase and/or change some Numerical control parameters in Phase settings. But it is almost impossible to find the reason of #103 without project.