Greetings to the forum members. I have two questions to ask.
1. I was trying to simulate the undrained loading and consolidation process of a circular skirted foundation and compare the results with previous research. Interaction between the foundation and soil was represented by either a fully rough or frictionless interface.
In the case of a fully rough interface, the results are in full agreement with the paper. However, in the case of frictionless interface, The excess pore pressure and consolidation settlement deviate by 20% from the result in the paper. I think that the interface is not completely smooth. (I set the Rinter=0.01 ). Can the interface be set as fully smooth as in Abaqus? Please teach me how to set it.
2. Can the excess pore pressure be input as the initial value before consolidation analyse?
Thank you very much for your time.
Dear 树锋 赵,
That is difficult to judge without seeing the details of the research and the PLAXIS model.
In order to be able to assist you with your project and identifying the reason for the problem you experience, please submit a service request.
Then, one of our support engineers can help you in detail: https://apps.bentley.com/srmanager/ProductSupport
Thank you for your answer Mr.Papavasileiou.
I have tried to use different custom materials to assign to the interface, but the results still deviate from previous research by 20%. Is this due to the software itself?
To answer both questions:
1. The Rinter was not implemented to work with such low factors, as this can cause numerical issues. You can use a Custom material to assign to the interface and directly apply the stiffness and strength you want for your case.
2. Excess pore pressure is a result of a PLAXIS calculation and cannot be given as input value. Note that excess pore pressures can develop due to undrained behaviour when one of the relevant options are selected in the material data set. As you might expect this is ignored in Consolidation and Fully coupled analyses.