Good morning,
I am trying to run a dynamic analysis and the error code 33 appears stopping the analysis at the beginning.
In the model there are not embdedded beams. Probably the issue is in the creation of free-field boundaries, because if I set viscous boundaries instead of free-field, there is no problem.
The static analysis works without problems.
What can I try? We have tried with different mesh configurations but the error still appears.
Thank you in advance,
Dear Andrea,
In order to be able to assist you with your project and identify the reason for the problem you experience, please submit a service request.
Then, one of our support engineers can help you in detail: https://apps.bentley.com/srmanager/ProductSupport
Hello Andrea,
I'm wondering if you've received a specific answer to your problem? or if you managed to solve it?
because I'm encountering the same type of error with Free-Field boundaries!
Thanks,
Hello Ahmad,
At the end I solved the problem without submitting a service request, just redrawing the topographic profile, simplifying it where possible.
I can suggest you to redraw the model, I used AutoCAD, without considering stratigraphy, so creating and importing to Plaxis just one single region, and check if it works. If not, the problem should be on the topographic profile. If it works, you can add the stratigraphy.
Let me know if you can fix the problem with this procedure.
Andrea