Define Nodes by Nodes Different Geotechnical Parameters

Question

Dear 
 
 Many thanks for your information. We know that in the Plaxis, we can create constitutive model programmed using FORTRAN and implement in PLAXIS through the "User Defined Soil Model" to create our own equations for the materials. 
 I have a question: 
 Could we define for each point a different geotechnical parameter in Plaxis 3D? 
 I mean could we define nodes by nodes different geotechnical parameters to be analyzed in Plaxis 3D? 
 I would be thankful if you may please guide me in this process. 
 
 Thanks for your response 
 I look forward to hearing from you 
 Sincerely 
 Amir Farshadfar

Micha van der Sloot · Accepted Answer

Dear Amir, 
 You could do this in PLAXIS 3D via the user-defined soil model routine. In the user-model you can access the coordinates of the stress point you are evaluating, and so you can change/update them via this method. This is not possible via the normal GUI.

Stefanos Papavasileiou · Answer

Dear Amir, 
 Have you found this article? https://communities.bentley.com/products/geotech-analysis/w/plaxis-soilvision-wiki/45468/creating-user-defined-soil-models 
 It contains lots of information regarding implementing User Defined Soil Models.

Define Nodes by Nodes Different Geotechnical Parameters

Top Replies