Deep Mix Column

Question

I have modelled Deep Mix Column under embankment loading. 
 In this modelling, I have made a negative interface around the DM column and assigned property custom [ DM Col-MC model_Drained_E_v_c_phi-r inter-0.69]. 
 When I hit calculate button in stage construction, it took too much time to solve but it didn't work as per the research paper. 
 How can I solve this problem? 
 Please see the attached screenshots... 
 /resized-image/__size/1920x240/__key/communityserver-discussions-components-files/343671/Screenshot-_2800_13_2900_.png ? 
 /resized-image/__size/1920x1920/__key/communityserver-discussions-components-files/343671/Screenshot-_2800_12_2900_.png

Stefanos Papavasileiou · Answer

Dear Mahabub, 
 It is extremely difficult for us to know the difference between the model you created and the one mentioned in the research paper. 
 In those cases the best approach is to reach out to the research paper authors to share more information about what they have included in their model, assumptions made, and any other considerations that lead to their results. In the end, it can be that their calculation also takes a long time to converge. 
 Note that a calculation can be long for various reasons, such as too large finite element mesh, plasticity development, and potential convergence issues.

Stefanos Papavasileiou · Answer

Dear Mahabub, 
 It is extremely difficult for us to know the difference between the model you created and the one mentioned in the research paper. 
 In those cases the best approach is to reach out to the research paper authors to share more information about what they have included in their model, assumptions made, and any other considerations that lead to their results. In the end, it can be that their calculation also takes a long time to converge. 
 Note that a calculation can be long for various reasons, such as too large finite element mesh, plasticity development, and potential convergence issues.