set properties for a embeddedbeam via python ---not working

Hi xiong qi,

You need to pass more variables to the embeddedbeam material object. e.g. the area, Iyy, Izz, even though they are displayed to be blanked out and cannot be manually edited - you need some logic to do area & second mom. of a circle 

Hi xiong qi,

You need to pass more variables to the embeddedbeam material object. e.g. the area, Iyy, Izz, even though they are displayed to be blanked out and cannot be manually edited - you need some logic to do area & second mom. of a circle 

Dear Xiong, 

We have made many improvements in our latest version regarding the properties exposed in GUI and what is needed in a Python script.

Since you are using an older version the solution is a bit more complex; Matthew is right. Practically you need to define more properties as we need them to internally compute the properties for the calculation.

So, for instance, try the following:

g_i.embeddedbeammat(
("MaterialName",'pile'),
("BeamType", 0),
("PredefinedBeamType", 1),
("Diameter", 1.2),
("Thickness", 0.15),
("E", 36.00E6),
("w", 24),
("Size", 1.2),
("A", 0.494800842940392),
("Iyy", 0.0695813685384928),
("Izz", 0.0695813685384928),
("I", 0.0695813685384928),
("Lspacing", 10.5),
("SkinResistance", 2),
("Tmax", 10000),
("Fmax",200)
)

Note that the figure these out is by creating the material manually and using the echo command to get all the listed properties.

Hi, Matthew and Stefanos.Thank you for your quick response! 

The project has been completed according to the method you gave.

Best wishes to you.