Get result via python

Question

Hello, 
 Im doing seepage analysis with monte carlo simulations. I want to take groundwater flow (q) result with python in phase 2 . I put my codes. But the results are wrong. ( not same with plaxis). 
 Thank you.

Stefanos Papavasileiou · Answer

Dear Arife, 
 In your description you mention that the results are wrong but you do not describe how so. From the information you shared, I cannot tell what is right or wrong. 
 So, maybe you can elaborate on what is wrong and what you expected. 
 By the way, the getresults commands has an additional parameter (boolean: True | False) to set the result smoothing on an off. Maybe that can explain the difference.

Stefanos Papavasileiou · Answer

Hello again, 
 If I understand correctly what you are doing in your script is not getting the max groundwater flow in the whole phase, but rather find the Qx value at a specific location. 
 SoilQx is a list that contains all the values of Qx for the whole model. That means that using Python's build-in function max() you can simply say: 
 max_soil_qx = max(SoilQx) print(max_soil_qx) 
 or in one go: print(max(SoilQx)) 
 Again remember to add the True parameter in the getresults command to apply the result smoothing or deactivate from View menu.

Stefanos Papavasileiou · Answer

Dear Arife, 
 I am afraid that in order to assist you further you will need to submit a Service Request: https://apps.bentley.com/srmanager/ProductSupport 
 Then we can check your model. 
 The command you are using is correct and the plot it represents is also what you show, therefore I am not sure I can figure out why it does not give you what you expect. 
 I am not sure what you mean by iterations as again the maximum value of the groundwater flow (Darcy velocity) is one value for the whole model and not defined by x or y coordinate.