Requesting for praxis 2D and 3D version setup

Question

i requesting for praxis 2D and 3D version setup. i have no these new version setup to conduct my research work. hence, i need your humble support to get it, please. 
 thank you

Stefanos Papavasileiou · Answer

Dear Defaru, 
 If your university owns PLAXIS 2D and PLAXIS 3D licenses, you should reach out to your administrator to give you access to the Software Downloads page: 
 PLAXIS 2D: https://softwaredownloads.bentley.com/en/ProductDetails/3162 P LAXIS 3D: https://softwaredownloads.bentley.com/en/ProductDetails/3165 
 To find your Account Administrator you can select "How are you CONNECTED" on the Welcome Banner in the CONNECT Center. For instructions see: How do I find my Administrator? 
 Practically you double-click on the executable installer and follow the on-screen instructions. 
 A step-by-step guide is shown in our General info Manual, which you can download here: Manuals - PLAXIS

Stefanos Papavasileiou · Answer

Dear Defaru, 
 Thank you for clarifying it. 
 This forum is intended for users that have questions about using PLAXIS application on geotechnical projects. Since you are interested in acquiring the software please check the following page: https://www.bentley.com/contact-us/