https://communities.bentley.com/products/geotech-analysis/f/forum/241476/hinged-connectionHello Everyone, I&#39;m looking to model a hinged connection between a volume and a surface (figure below, green line). Is it correct to create an Embedded Beam at the intersection and choose Connection : Hinged? What bothers me is that there will be onlyen-USTelligent Community 12https://communities.bentley.com/thread/752788?ContentTypeID=1Fri, 10 Feb 2023 10:39:26 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:ee91e808-f303-4110-a2f3-9893f5f18b82Zakaria ZIRI<p>Thank you Hung !&nbsp;</p><div style="clear:both;"></div>https://communities.bentley.com/thread/752784?ContentTypeID=1Fri, 10 Feb 2023 10:27:53 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:f9ac733f-12fa-4f04-9760-6bfc0e92bd05Hung Ho Manh<p>Hello Zakaria,</p> <p>You may consider creating a dummy plate (small stiffness) on the volume element. So, you now create a custom connection between two plates. Short connection length would be simulated for a connection point.</p><div style="clear:both;"></div>