How could I obtain the type of the plastic points of the udsm ISO-JRMC model as shwon in M. Stelzer (2015) - Numerical Studies on the PLAXIS Jointed Rock Model, Master Thesis, TU Graz. (see figure a). When I applied the ISO-JRMC model the type of the plastic points are as shown in figure b (Isotropic Jointed Rock with Mohr-Coulomb Failure Criterion - PLAXIS UDSM - GeoStudio | PLAXIS Wiki - GeoStudio | PLAXIS - Bentley Communities)
Thank you very much
Figure a)
Figure b)
Dear Ana-Belen,
Unforturnately figure A seems to be missing. Could you please upload it again here?
With kind regards,
Dennis Waterman
Thank you for your email. I attached below the plot from the Stelzer’s Mater thesis (2015) it seems the author identified the cap and hardening failure points as JR and MC failure points isn’t it? Is it a right correlation?
thank you
It seems they did indeed. However, it is not possible to overwrite the names in a model, so PLAXIS Output will always call them cap points and hardening points. So I presume they've modified the legend by just modifying the picture in an external drawing program.