https://communities.bentley.com/products/geotech-analysis/f/forum/243800/simulating-solid-pileHi , I am trying to simulate two piles, one of them embedded totally in the soil whereas the other has free length above the soil. I did them as volume piles. I set the material of the piles as a concrete and shown with a different colour from theen-USTelligent Community 12https://communities.bentley.com/thread/760761?ContentTypeID=1Wed, 05 Apr 2023 14:00:05 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:28cff3f5-4f2c-44e3-a8ed-bac49e699f74maha alrudainy<div dir="ltr"><div>Hi Hung</div>Thank you for your response. <br /><div><br /></div><div>Rrgards</div></div><br /><div style="clear:both;"></div>https://communities.bentley.com/thread/760688?ContentTypeID=1Wed, 05 Apr 2023 06:20:49 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:f32ba96b-38dc-4da1-a864-db0e571b8b26Hung Ho Manh<p>Hello Maha,<br /><br />Volume pile embedded in the soil is set as soil material by default (you can see it later on in the Initial phase of Staged construction). So, you just assign the pile material to the piles in staged construction phases.</p><div style="clear:both;"></div>