Hi all,
I'm learning to model in Plaxis 3D and I created a Plaxis 3D model as shown below. I draw the surfaces separately and when generating the mesh there where orange colour boxes and in the geometry also the soils which are divided by the surfaces not divide as shown below. What is the reason for that?
Thanks
Hi Nitharshan,
Whenever PLAXIS detects a geometric inconsistency or an area that could create a low-quality mesh, the application will try to localise the problem and display a bounding box around it.
You may also want to check the following material online on how to generate your mesh properly or troubleshoot the errors:
Dear Mr. Vasileious Basas,
Thanks and will check.