https://communities.bentley.com/products/geotech-analysis/f/forum/246670/regarding-meshHi, I had created a model and had meshed it. Now, I want to change some components in my model. Do i have to remesh the model or is there any feature for that. So that i do not have to remesh the entire model.en-USTelligent Community 12https://communities.bentley.com/thread/770241?ContentTypeID=1Tue, 20 Jun 2023 05:39:51 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:8734cee6-96d8-44b4-b0fb-fe039d608344Dennis Waterman<p>Dear Div D,</p> <p>If you make&nbsp; changes to the model you have to indeed remesh it. There is no possibility to only partially remesh the model.</p> <p>With kind regards,</p> <p>Dennis Waterman</p><div style="clear:both;"></div>https://communities.bentley.com/thread/770235?ContentTypeID=1Tue, 20 Jun 2023 03:44:06 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:e1b3c212-b21c-4f69-8b07-a8425881acfcDiv D<p>Hello Jesse,</p> <p></p> <p>I am using Plaxis 3D version V22.00.00.1733&nbsp;for a geotechnical project investigation.&nbsp;</p><div style="clear:both;"></div>https://communities.bentley.com/thread/770214?ContentTypeID=1Mon, 19 Jun 2023 23:22:34 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:55da0bf7-ab77-4a92-a5d0-4d0344f6fb02Jesse Dringoli<p>Hello, Which Bentley product are you using and what version? This forum is for feedback on the site itself, not for technical questions. I will help move your post to the appropriate product community forum once I know which product you&#39;re using.</p><div style="clear:both;"></div>