Dear All,
I am a newbie of Plaxis. I would like to ask about water condition "Global", "Dry", "Head" & "Interpolate" in 3D
When the model with multi-layer excavation 1 by 1, I would like to ask whether my logic in Plaxis correct or not:
Stage 1: Excavation of 1st Layer
Layer 1: Set "dry" and "deactivate"
Layer 2: Set "head" and Zref = 500mm below 1st excavation level
Layer 3: Set "interpolate"
Layer 4: Set "interpolate"
Soil below Layer 4: "Global"
Soil outside sheet pile wall: "Global"
Hope someone can help me.
Or this?
Layer 2: Set "head" and Zref = 500mm below 1st excavation level (Say -3.5m)
Layer 3: Set "head" and Zref = -3.500m
Layer 4: Set "head" and Zref = -3.500m