Hi, I modeled a moving load with constant speed of 1 m/s the load moves from x=0 to x=20, when I get the calculation results, plaxis shows me the output of final time(when the load reaches to x=20) and I want to see the path of moving load between x=0 and x=20, I can’t see what’s going on between the steps I only see the result of the final time, when I want to scroll between steps it changes the construction phases, not between the steps, what can I do with this problem?
For examples in the picture that I’ve attached I want to see what’s going on in step 45, but when press the red buttons it goes to step 0 or step 100
Regards
Dear Amir Mohammad Yarahmadi,
Firstly, if you want to see intermediate steps please use the button on the left side of phase list:
Secondly, please change the Max number of steps stored in Phases settings window:
By default the value is 1.
It means, that PLAXIS saves only the last step for this phase.
If you want to see all steps in Output, please change it to the value = Max steps:
In this case PLAXIS will save all intermediate steps, that you can inspect in Output.
Hope, it will help.
Dear rushan gizzatullin, thank you for your help, it was very helpful, I greatly appreciate it.
You are welcome.
In this case PLAXIS will save all intermediate steps, that you can inspect in Output. MyAARPMedicare Login
thanks