UD-Power and E_oed for interface (UDSM model)

Dear Ahmad, 

Typically it is very difficult to recommend values for material parameters as these highly depend on the surrounding soil you have. I would recommend you checking first our Material Models manual to understand the formulation of the oedometer modulus for the interface and the stress dependency applied.

Then, you can check on literature on values related to the type of material you have and close to the region that your project is related to and run some test runs to validate the behaviour.

tanx for your answer Dear Stefanos,
I read material manual first of course but i does not give sufficient information.it just introduced parameters.i hoped if you could give me some clues to follow.

tanx for your answer Dear Stefanos,
I read material manual first of course but i does not give sufficient information.it just introduced parameters.i hoped if you could give me some clues to follow.