Hi all.
Im assigning material for HS model based on literature value but this error came, what is the problem?
Please reply ASAP which will means alot.
Thanks.
Dear Nitha,
The error is for K0NC, which is the K0 for normally consolidated state, so please make sure not to confuse it with a K0 value.
Typically the K0NC = 1 - sin(φ).
If you still cannot find the reason for this error, please submit a service request.
Then, one of our support engineers can help you in detail: https://apps.bentley.com/srmanager/ProductSupport
i found that because i didnt provide konc for that model.
normally Eur (unloading reloading stiffness) is three times of the E50 (based on one research paper) <= this also provided in the plaxis material model also as shown below. so increase the Eur value to solve that error .
Did you execute the model by python scripting?
no i dont know python scripting
ok thank you
you are welcome