• PLAXIS Python output plot zoom

    newest_plot = g_o.Phases[-1] newest_plot.ResultType = g_o.ResultTypes.Plate.Utot newest_plot.PlotType = 'shadings' image_wrapper = newest_plot.export(2048, 1200) For an example I have a plot like this, Is it possible to make it zoom in or out to make…

  • How to identify the material name of an object in Output using Python scripting

    Application PLAXIS 2D PLAXIS 3D Version PLAXIS 2D 2023.2 PLAXIS 3D 2023.2 Date created 21 September 2023 Date modified 21 September 2023 Original author Stefanos Papavasileiou - Bentley Technical Support Group …

  • Plaxis Plate MaterialID property is missing V2023.2

    If I am not wrong, until version 2023.1, I could access the Plate Material ID through Python using the g_o.ResultTypes.Plate.MaterialID syntax. My goal is to obtain the names of plates and their corresponding plate materials for each phase (in Output…

  • Result smoothing and ignore discontinuities options

    Hi all, Please explain what these options will do in the results? Thanks.

  • Target machine refuse connection on output

    Dear all, I'm trying to run some batch calculations in a number of machines using the python-Plaxis wrapper. I have configured both input and an output ports for the machines to communicate with the Plaxis server. However, when writing the output, the…

  • PLAXIS Output Viewer 2023.2 Release notes

    New in PLAXIS 2D/3D Output Viewer 2023.2.1 Release: October 2023 The PLAXIS 2D/3D Output Viewer Version 2023.2.1 contains the following improvements and updates compared to PLAXIS Output Viewer 2023.1 : PLAXIS 2D Output Viewer 2023.2.1 (23.2…

  • Modelling of volume pile

    Good Morning Sir, I am modelling my concrete using volume element in PLAXIS 3D. It is easier to get shear force and bending moment through this modelling. We can get the bending moment and shear force along the length of pile using cross section curve…

  • Plaxis plot output python: setting the plottype doesn't update in the exported figure.

    I am trying to export plots for structural elements. In one case i prefer to have a distribution plottype instead of deformation. Setting the plottype from python does result in a correct command in the plaxis command lines, however nothing happens. Only…

  • Rotation of a single mesh element (triangle) in Plaxis 3D

    Dear Ladies and Gentlemen! Is there a way to get the rotation of triangles of a mesh (single mesh element)? I have dummy plates with low stiffness to evaluate the deformation of shallow foundations (slab) from different buildings above a NAT-Tunnel…

  • Help to find the type of this output plot and how to get it

    Hi all, I found this Plaxis 2D output from a paper but don't know how to get it {symbols on the plot seem to be principle stress plots but the results only show along the failure plane (basal heave)}. Anyone, please help to explain me how to get it…

  • PLAXIS2D Python automation - any api for report generator?

    Hello everyone, Is there any pythonic way to deal with generating report? Thank you.

  • Different output for the same type of construction stage

    I am using plaxis 3d to model geocell under static loading i.e plate load test. I want to analyze the effect of pocket shape of geocell in the numerical modeling, hence i make 2 different scenarios, i.e. real shape geocell and diamond shape geocell…

  • ISO_JRMC model plastic points (JR failure , MC+JR failure)

    How could I obtain the type of the plastic points of the udsm ISO-JRMC model as shwon in M. Stelzer (2015) - Numerical Studies on the PLAXIS Jointed Rock Model , Master Thesis, TU Graz. (see figure a). When I applied the ISO-JRMC model the type of the…

  • Output Issue - Modelling Triaxial Test (using axisymmetric model) with Creep-SCLAY1S model

    Hi, I tried to simulate triaxial test in PLAXIS 2D using simple axisymmetric model with Creep-SCLAY1S model. Specifically, I tried to mirror the one test that provided in "PLAXIS The Creep-SCLAY1S model 2018.pdf". However, when I use different strain…

  • Colormap normalization in output

    Dear All, Thanks for your help in advance. I am working on mapping the color shown in the output page to the actual represented values (stress or strain), under the guidance of the color bar at the right hand side. The first thing I need to know is…

  • Interface stresses

    Hi, In the table output of interface stresses there are two options 'node values' and 'stress point values'. Which one should be used to extract stresses? Do interface has stress points as well? The status of the points show failure or failure…

  • Displacement in slope under dynamic loading.

    Hello, I was simulating the slope under the dynamic condition to assess the displacement under dynamic loading, during the calculation phase the curve shows there is variation in displacement with time but when it appears in the graph, that shows up a…

  • Report generator issue with Material information when different material types for plates and anchors used in projects

    Application PLAXIS 2D Issue status Solved First Affected Version PLAXIS 2D CONNECT Edition V22 Update 2 Found in Version PLAXIS 2D CONNECT Edition V22 Update 2 Fixed and Released in Version PLAXIS 2D 2023.1 Issue…

  • Python is interface/plate/anchor active?

    Hi all, is there a way in Python to get whether an item is active in the phase? purpose: looping through the phases and read the data out of every interface/plate active in that phase. something like: for fase in g_o.Phases[:]: for Interfa…

  • set automatic values in Legend for OUTPUT using Plaxis Python

    Hi, I want to set automatic values in the legend for OUTPUT using Plaxis Python. I tried this: g_o.Plots[- 1 ].LegendSettings.MinValue.Automatic = True g_o.Plots[- 1 ].LegendSettings.MaxValue.Automatic = True it doesn't give any error, but also…

  • Plastic Point and Plastic History Point

    Hi Everyone, Thanks for the help in advance!! I understand the plastic failure point means the soil element is currently at the failure envelop and it could disappear in the next calculation step if unloading occurred. However, I figured there…

  • PLAXIS Output Viewer CE V22.02 Release notes

    New in PLAXIS 2D/3D Output Viewer CONNECT Edition Version 22 - Update 2 Release: October 2022 The PLAXIS 2D/3D Output Viewer CONNECT Edition V22 - Update 2 contains the following improvements and updates compared to PLAXIS Output Viewer CONNECT…

  • create annotations in an output in plaxis2D by python

    Hi All, just a suggestion of improvement: it would be nice to be able to create and edit annotations for plots within python. Example: deformation plot and an annotation of the corresponding Msf value.

  • Structural results in tables and curve plots

    Application PLAXIS 2D PLAXIS 3D Version CONNECT Edition V20 and later Date created 19 September 2022 Date modified 19 September 2022 Original author Stefanos Papavasileiou - Bentley Technical Support Group Description…

  • water pore pressure

    hello. I want to ask, previously at this time I was modeling soil improvement using the PVD method with preloading, but when I saw the pore water pressure output in the middle of the soft clay layer the result was like this. if it's like this why is my…
Communities
Support and Services
Training and Learning
Social Media