Hello, For plotting purposes, I would like to keep a constant zoom and axis distances for different output files from the left to (1 50) and (-20 50); right now I'm manually clicking and zoom in to the desired values but is not as accurate as required…

I am trying to validate a small-scale rough tension pile embedded in sand using PLAXIS 3D. I am using a volume pile with the linear elastic constitutive model for concrete and sand with MC constitutive model. The volume pile was modeled with an interface…

Hi - I have a piled-raft model with piles modeled as embedded beams. Initially when looking at the results, the embedded beam would appear as lines when plotting normal force or bending moment diagram. At some point some changed and now the visualization…

In Plaxis 2D output, phase report could be generated automatically using "Report generator". However, the option only limited to phase, regardless of more than 1 step have been stored. It can be done manually which "Switch between steps" then go the table…

Hi! I work on a project in Plaxis 2D in which I make many charts to get the best solution. In order to get the best solution, I make many recalculations and I always need the same charts. How can the charts be updated after recalculation? Or do…

Hi all, I have a problem when run Plaxis by python code as follow: in the output Plaxis I run the code for step in g_o.Phase_3.Steps: Xcoor = g_o.getresults(step, g_o.ResultTypes.Soil.X, 'node') The output in Plaxis appear a notification !!!!> getresults…

Hi, I have a question regarding the extraction of material information from Plaxis Output. Following the example given by this article: https://communities.bentley.com/products/geotech-analysis/w/plaxis-soilvision-wiki/45443/material-lists-in-plaxis…

Hello , I am trying to inspect the water table coordinates in where pass through an embankment in PLAXIS-3D OUTPUT. Does anyone who know how can i get the coordinates ?.Thank you

Hello My name is Emre; I work on an article which is related to piping on earthfill dam.So only thing that i should do in to check the hydraulic gradient in stress tabsheet in output.Then, comparing to critical hydraulic gradient(which is already known…

Hi, I am currently working on a dynamic modelling project in PLAXIS where we are obtaining the lateral earth pressures on a gravity retaining wall. The retaining wall is modelled as a linear elastic material. To export the results, I have preselected…

What is the command line to export automatically connectivity plot ? Forces in tunnel plates from the Output program with Plaxis 2D ?