When not having the correct entitlements activated, PLAXIS may give you a warning that you do not have the proper entitlement (or licence) in order to open a PLAXIS model. This could be caused by the fact that the setting for the appropriate entitlement/licence is deactivated.
When starting PLAXIS 2D CONNECT Edition or PLAXIS 3D CONNECT Edition, PLAXIS, by default, shows a window with the activated Entitlements for this session:
By default, you start with the Basic entitlement, and you have to activate other entitlements manually.
Via the Configure licences button you may change the selected entitlements:
You can choose not to see this startup window (Figure 1) with the activated and deactivated licences anymore when the option to Show on Startup is disabled.
To access the licence configuration, start a new project in PLAXIS Input, and go to the Help menu. Here choose the option Licence configuration... Note that any change will be applied after restarting PLAXIS Input.
To allow for the licence window to appear again at startup, please activate the option via the following menu item in PLAXIS Input:Options > Licence information > Show on startup