You are currently reviewing an older revision of this page.
This section contains relevant publications for PLAXIS Monopile Designer
PLAXIS MoDeTo implements the PISA design method in a daily engineering application, for the design of monopile foundations for offshore wind turbines, including large diameter monopiles. The broad scope of the PISA joint industry project are summarised in recent publications.
This document describes a validation example for the PISA design method, implemented in PLAXIS MoDeTo, for monopiles embedded in a clay soil. Based on the results obtained from the pile tests conducted at the Cowden site during the PISA project with a close fit between the PLAXIS MoDeTo model and the field data.
This document describes a validation example for the PISA design method, implemented in PLAXIS MoDeTo, for monopiles embedded in dense sand. Based on the results obtained from the pile tests conducted at the Dunkirk site during the PISA project with a close fit between the PLAXIS MoDeTo model and the field data.