Thermosyphon boundary option is not fully documented in 2D 2016/2D 2017


ApplicationPLAXIS 2D
Issue status✔ Solved
First Affected VersionPLAXIS 2D 2016.00
Found in VersionPLAXIS 2D 2016.00
Fixed and Released in VersionPLAXIS 2D 2017.01
Issue #SW-17248
Date created23 June 2017
Date modified09 October 2017

Problem description

The Thermosyphon thermal boundary option was not fully documented in PLAXIS 2D 2016 and PLAXIS 2D 2017.00. 

Because of this, its behaviour might be unclear in some cases or it might not give results as expected. Note, this option works properly.

Known issue Thermosyphon 2D 2016/17

 

Solution

The Thermosyphon boundary option works correct and as intended.

 

See also