You are currently reviewing an older revision of this page.
The design of tunnels usually involves the use of structural elements, including the reinforcements of the tunnel. In PLAXIS 3D's Tunnel Designer we can define girders (ribs, wailings etc.) along the perimeter or around the cross-section of a tunnel at slice boundaries, by assigning a beam to the line or polycurve between two adjacent segments in the Plane Properties.
Unfortunately, in PLAXIS 3D CONNECT Edition V20 Update 4 (CE V20.04) when girder beams are assigned to arc segments of the tunnel cross-section, we see that the beam arcs are generated in the wrong direction when using the Generate Tunnel action, leading to incorrectly defined tunnel geometries:
We are working on solving this problem for an upcoming release. As there is currently no known workaround, users are advised not to use the plane reinforcement (girder) definition in PLAXIS 3D CONNECT Edition V20 Update 4.
When these girders are needed in your design, please use PLAXIS 3D CONNECT Edition Update 3 (CE V20.03) instead, until this issue is resolved. You can download this version of PLAXIS 3D from Bentley’s Software Downloads:https://softwaredownloads.bentley.com/en/ProductDetails/3165