The MIT S1 model describes the rate-independent behaviour of clays, sands and silts within a unified elasto-plastic formulation.
For more information and to request the model, please contact:
Prof. Andrew J. WhittleDepartment of Civil & and Environmental EngineeringMassachusetts Institute of TechnologyRoom 1-35377 Massachusetts AvenueCambridge, MA 02139USAtel: +1 617 253 7122fax: +1 617 253 6044e-mail: ajwhittl@mit.edu
Prof. Juan M. PestanaGeoEngineering, Department of Civil and Environmental Engineering421 Davis HallUniversity of California, BerkeleyMC-1710 Berkeley, CA 94720-1710tel: +1 510-643-0809e-mail: pestana@ce.berkeley.edu
Please note: This model is available as a user-defined soil model. However, Plaxis does not accept any responsibility when using this DLL. Hence, the user needs to validate results obtained from this model by him/herself. Plaxis does not provide support on the use of this model.
64 bit User Defined Soil model
[Tips and Tricks]
How to use a user defined soil model in PLAXIS
[Videos]
Plaxis User Defined Soil Models
[Models]