Application | PLAXIS 3D |
Issue status | ✔ Solved |
First Affected Version | PLAXIS 3D 2010 |
Found in Version | PLAXIS 3D 2010 |
Fixed and Released in Version | PLAXIS 3D 2011 |
Issue # | 15877 |
Date created | 19 April 2011 |
Date modified | 24 October 2016 |
When using activated embedded piles and/or beam elements in a consolidation analysis the PLAXIS 3D 2010 program in general will not find a stable solution and reports an error. In rare cases the program might finish the calculation, however, results should not be used in this specific case.
There is no standard workaround available for PLAXIS 3D2010
This issue is solved in PLAXIS 3D2011