Saturation is 0% for phreatic level calculations in PLAXIS 3D 2011.00


ApplicationPLAXIS 3D
Issue statusOpen
First Affected VersionPLAXIS 3D 2011.00
Found in VersionPLAXIS 3D 2011.00
Fixed and Released in Version
Issue #14892
Date created30 June 2011
Date modified24 October 2016

Problem description

Saturation is always displayed as 0% in Output when pore pressures are generated using a phreatic level calculation (rather than a steady state groundwater flow). This is purely a cosmetic issue, the calculations are performed correctly.

Solution

This is fixed since PLAXIS 3D 2011.01