Learning with PLAXIS - on-demand

Latest

This page lists an overview of recent webinars that are now available on-demand. For onboarding training paths, see the related page on Onboarding PLAXIS training videos

Coffee Corner [see more]	Mechanical Behavior of Geosynthetics		November 2022
Webinar [see more]	Geological Modelling to Geotechnical Design: Interoperability between Leapfrog and PLAXIS 2D		July 2022
Answer Hour [see more]	Interface Elements in PLAXIS and How to Use Them		July 2022

Geotechnical Analysis Coffee Corner on-demand sessions

The technology presentations previously known as Special Interest Groups (SIGs) have now become a part of the new Coffee Corner webinar platform. This format is intended to get more out of your Geotechnical Analysis.

Mechanical Behavior of Geosynthetics		Coffee Corner	November 2022
Combining a PLAXIS analysis with SLOPE/W's Limit Equilibrium for slope stability		Coffee Corner	October 2022
Beyond analytical calculations with PLAXIS		Coffee Corner	September 2022
Automated design of monopile foundations using PLAXIS Monopile Designer		Coffee Corner	August 2022
Easy geometry creation with PLAXIS 2D and 3D		Coffee Corner	June 2022
Embankment settlement on overconsolidated clay		Coffee Corner	May 2022
Efficient Tunnel Advancement for Complex NATM Tunnels in PLAXIS		Coffee Corner	April 2022
More Efficient PLAXIS Usage with Python API including a deep excavation case		Coffee Corner	March 2022
Modelling fractured rock mass with PLAXIS 2D		Coffee Corner	February 2022
Fundamentals of Designing with Geosynthetics in PLAXIS		Coffee Corner	December 2021
Using PLAXIS Sensitivity Analysis and Parameter Variation		Coffee Corner	November 2021
Getting PLAXIS Calculation Results		Coffee Corner	October 2021
NorSand: Liquefaction analysis in PLAXIS		Coffee Corner	September 2021
From Soil Data to Final Design using PLAXIS Monopile Designer		Coffee Corner	August 2021
Embankment stability using PLAXIS 3D		Coffee Corner	July 2021
Integrated Design of Suction Bucket Foundations using the new SACS-PLAXIS Interface		Coffee Corner	June 2021
Combining a PLAXIS Analysis with OpenFlows FLOOD		Coffee Corner	June 2021
Combining a PLAXIS Analysis with Limit Equilibrium for Slope Stability		SIG workshop	May 2021
Thermal Analysis for Geotechnical Engineering with PLAXIS 2D		SIG workshop	April 2021
Seismic Behavior of Fine-grained Soils Using PM4Silt		SIG workshop	March 2021
Embankment Modelling and Auto-generated 2D Sections using Python		SIG workshop	February 2021
Dynamics and Seismic Features in PLAXIS		SIG workshop	January 2021
Modelling Piles in PLAXIS 2D and 3D		SIG workshop	December 2020
3D large-strain consolidation analysis in SVFLUX and SVSOLID		SIG workshop	October 2020
PLAXIS Calculation Optimizations		SIG workshop	September 2020
XXL Monopiles for Offshore Wind Turbines in Homogeneous and Layered Soils		SIG workshop	August 2020
Optimizing Undrained Parameters for Undrained Soft Soils		SIG workshop	July 2020
Working With 3D Deep Excavation in PLAXIS, part 2: Structural elements		SIG workshop	June 2020
Working With 3D Deep Excavation in PLAXIS, part 1		SIG workshop	May 2020
Using SoilVision SVSLOPE to Determine the Factor of Safety		SIG workshop	April 2020
PLAXIS + PlaxFlow: Running a Groundwater Flow Analysis		SIG workshop	March 2020
Simulating Soil Lab Tests for PLAXIS Soil Model Parameters		SIG workshop	February 2020
Using PLAXIS to Determine Factors of Safety		SIG workshop	January 2020
PLAXIS 2D Workflow and Cross Section Curves using PLAXIS CONNECT Edition		SIG workshop	December 2019
Understanding Non-converged PLAXIS Calculations		SIG workshop	2019 - 12 (Dec)
PLAXIS CONNECT Edition: Excavation Dewatering and Common Pitfalls		SIG workshop	2019 - 11 (Nov)
3D Tunneling with PLAXIS		SIG workshop	2019 - 10 (Oct)
Better Geometry with the new PLAXIS 3D CONNECT Edition		SIG workshop	2019 - 09 (Sept)
PLAXIS: Modeling Monopile Foundations in 3D and 1D		SIG workshop	2019 - 08 (Aug)
PLAXIS Command Line and Scripting for Automated Model Definition		SIG workshop	2019 - 07 (July)
PLAXIS 2D Dynamics With the New Site Response Analysis Tool		SIG workshop	2019 - 06 (June)
PLAXIS 2D Workflow and Cross Section Curves		SIG workshop	2019 - 05 (May)

Geotechnical Analysis virtual on-demand events (webinars)

On the Bentley Events and Webinars page https://www.bentley.com/en/global-events/events-overview you can find many upcoming live sessions and on-demand webinars and trainings from various platforms.

Below is a list of recent on-demand events in English. For other languages, please visit the events overview.
For the list of upcoming events, click here.

Geological Modelling to Geotechnical Design: Interoperability between Leapfrog and PLAXIS 2D		Webinar	July 2022
Connected Workflows for Geotechnical Projects in Transportation		ASCE Webinar	May 2022
Integrated ground modelling for offshore windfarm development; informing risk and foundation design		Lyceum	September 2021
India Structural Conference Series 2021: Analysis of Water & Wastewater Structures with STAAD CE		Webinar	August 2021
Bentley Webinar: Reliable slope-stability analysis for open-pit mines		Webinar	April 2021
Bentley Webinar: PLAXIS introduces NorSand model with creator, Mike Jefferies		Webinar	March 2021
Bentley Webinar: What's New in PLAXIS 2D/3D CE V21		Webinar	February 2021
PLAXIS LE for both Civil Infrastructure and Mining Applications		Webinar	March 2021
PLAXIS Monopile Designer V21: Latest Features and Upgrades		Webinar	February 2021
Advanced numerical modelling of ground improvement 1/3: Constitutive modelling of uncemented materials		Webinar	December 2020
Advanced numerical modelling of ground improvement 2/3: applications of the brittle Concrete Model		Webinar	December 2020
Advanced numerical modelling of ground improvement 3/3: Practical Applications of ground improvement		Webinar	December 2020
Accelerate Civil: Geotechnical Analysis and OpenRoads Designer		Webinar	August 2020
Accelerate: Less overdesign with efficient monopile design.		YII webinar	November 2020
Modelling of Excavation and Influence of Groundwater: An Introduction		Webinar	August 2020
Shaft, Excavation and Dewatering: Learn and evaluate most common convergence issues		Webinar	July 2020
Modelling of tunnels and tunneling (TBM)		Webinar	July 2020
Modelling of NATM geometries using Tunnel Designer		Webinar	July 2020
Cost-effective Monopile Design Using SACS - PLAXIS MoDeTo Interop		Webinar	July 2020
Efficient deep foundation modeling and analysis with PLAXIS 3D		Webinar	July 2020
PLAXIS MoDeTo CONNECT Edition		Webinar	June 2020
3D Tunnel modelling made easy with PLAXIS		Webinar	June 2020
Geotechnical Engineering for Embankments		Webinar	May 2020
From Structural to Geotechnical: Deep Foundations Analysis in PLAXIS 3D from a STAAD.Pro Model		Webinar	May 2020

Answer Hours

The Answer Hour program is a format in which users can bring their own questions to a live session. Below is a list of recently recorded sessions.

Interface Elements in PLAXIS and How to Use Them		Answer Hour	July 2022
Structural Elements in 2D and 3D Excavations		Answer Hour	February 2022
Modeling Initial Stresses with PLAXIS		Answer Hour	December 2021
Efficient Drawing in PLAXIS - Overcoming Meshing Challenges		Answer Hour	October 2021
Ground Water and Pore Pressures in PLAXIS		Answer Hour	July 2021