Depths out of order when outputting.

Question

Hi All, 
 
 I'm having some trouble trying to create a soilbore profile which had a stockpile on top. The stockpile was .45m high AGL, below it was natural ground which was augered to 0.3m BGL. Ideally it'd look something similar to the table below: 
 Depth - mBGL | Lithological Description.

-0.45 m 
 Stockpile - red

-0.3 m 
 Stockpile - grey

-0.1 m 
 Stockpile - red

Ground level 
 HDPE liner - black

0.2 m 
 Natural sand - blue

To represent the above ground stockpile, I entered the stockpile depths as a negative. This almost worked, except the order of the depths is wrong, it has just sandwiched the -0.45m depth at ground level, in the same cell/box as the -0.1m data. This results in it looking like: 
 Depth - mBGL | Lithological Description.

-0.3 m 
 Stockpile - grey

-0.1 m 
 
 - 0.45

Stockpile - red 
 
 Stockpile - red

Ground level 
 HDPE liner - black

0.2 m 
 Natural sand - blue

Does anyone know how I can change this so the log appears as it does in the first table? 
 
 Thanks, 
 Andrew Mortimer

Kirk Johnson · Answer

Hi Andrew, 
 It really depends on what type of report you are creating and your custom gINT files. Here is a basic example of a log report. There are two text vs depth columns. One for lithology Depth and one for Lithology Description (see example below) .. You can also set the report property top depth expression to be the Min lithology depth (see below. There are endless possibilities (different report types, how your files are setup etc..) 
 If you want something different than this contact me at kirk.johnson@bentley.com and I can help you set up your customized files. 
 Here is how I input the data

This is the output