gINT Civil Tools to start in Power GeoPak SS4?

Question

How do I get gINT Civil Tools to start in Power GeoPak SS4? Is there a configuration var. I need?

Kirk Johnson · Accepted Answer

Hi Garry, 
 
 The old gINT civil tool used to be an addin for older Bentley civil products (ie power civil, inroads,geopak). This addin has been discontinued years ago and replaced with a full standalone Microstation platform based product also called gINT civil tools. This can be downloaded from the Bentley software fulfillment center under the gINT product brand. It is called gINT civil tools connect edition and the current version number is 10.02.00.20 . 
 
 The Entire gINT Civil Tools Connect edition Product is also included as a geotechnical Ribbon inside of Open Roads Designer. 
 
 Information about the gINT civil tools can be found here.

gint civil tools connect edition videos and wiki articles

The old addin Which I do not recommend at this time as it has been discontinued will only work on SS2 and SS3 versions of the old Bentley civil products . Information can be found here It will not work in SS4 Versions of Bentley Civil Products

Geotechnical Tools for InRoads and GEOPAK Users (gINT Civil tools) Video

By Kathleen Holcomb over 8 years ago in OpenGround | gINT | Keynetix > OpenGround | gINT | Keynetix Files