RE: gINT Logs - printing a single log as multiple yet continuous pages? Setting custom depth intervals?

Kirk Johnson — Tue, 05 Mar 2019 20:26:20 GMT

Hi TW,

If you are using one of the standard file sets then you can override it in INPUT at the Project level in the Project table Depth Log Page Field or at the Point level in the bore hole table (point) Depth Log Page field. Put in 50 .. That will be the number of feet show on the first page.

If you have your own custom file set and do not have fields setup to override the number of feet then goto report design...Properties and look at the depth units pg 1 . It might be your own expression or a hard coded number you can change it there.

If it is just a hard coded number you can adjust it in the output screen for a particular output.

For you scale question you can set the scale Numbers and scale tick mark increment properties in report design in the scale entitiy.