Hi there, I am trying to display a bore log with two surface casings:
-1 larger diameter surface casing is cemented to 6m
-1 smaller diameter surface casing is cemented to 53m
I would like to be able to visualise the cement in the gaps which are marked with blue in the image below. The problem I am encountering is that the Cement symbol fills all the way to the bore casing and covers the gravel pack which I don't want (a picture of this is also attached). After hours playing around I have had no joy displaying two gINT symbols adjacent to each other without overlapping. Can anyone help?
Thanks in advance, Jack.
Hi Jack
Your gINT files share some functionality with this https://docs.datgel.com/monitoring-tool/latest/user-guide/tutorials#id-.Tutorialsv3.1.0-PiezometerCasingTable.1. You need to enter data on the Piezometer Casing table.
regards
Phil
Phil WadeDatgelBentley Channel Partner and Developer PartnerE: phil.wade@datgel.com | T: +61 2 8202 8600 & +65 6631 9780
Get the most out of gINT with Datgel Tools.