Hi everyone.I was inputting data on the N value under data tap, and I come across a data ">50" or "50+" does anyone know what ways to input this data so that it will show higher than 50 on a sample?Right now doesn't matter what I put it. That is other then a number or "WR" it will become blank.
so far the only way I know to go around this is to edit the PDF file after the borehole log is complete.
Hi Clement,
It sounds like you will need to go to Report Design, open the entity that shows the N value, and check the Text Expression. The expression may be set up to show only certain values. The simplest expression would just be the <<Table.Field>> where your N value is entered, which would show the N-Value exactly as-entered in INPUT. For example, if the table name is Data and the field name is NValue, the expression would be <<Data.NValue>>.
There are other possible causes (like a Body Data Output Condition), but the Text Expression would be the first place to check.
For more info, check out our Log Report Design tutorial. And it would be a good idea to make a backup copy of your library file (.glb) in case anything goes wrong trying to change this.
I'm also assuming that the N value field is a text field, and you are able to enter a value like ">50" or "50+" in INPUT without a problem. That's what it sounds like, but If that's not the case, it will be a different issue.
Regards,
Jesse