Hello,
Let's say I want to prepare fence diagram report(s) for a project with ten (10) borings. For each of these borings, I also want to show three data such as SPT-N, moisture content and unconfined compression. As you may understand, if I want to save all the ten borings with three data each in one fence diagram sheet (A4 page, landscape), it will be too much information and very difficult to read. Hence, I want to get my outputs in two sheets (borings 1-5 in sheet 1 of 2, and borings 6-10 in sheet 2 of 2). I know I can do this manually, but I was wondering if there's any way to do this automatically where I can specify the number of borings I want as an output in one fence diagram sheet.
Your help is much appreciated.
Thank you.
Brett
Hi Brett,
You can use gINT Scripts to remember the boreholes to output on each Fence sheet. You could also use gINT Rules to further automate the process, although that would need to be set up custom for your needs.
For more info, check out the gINT Special Interest Group recording from June 2019, available on the Bentley LEARNServer:
https://learn.bentley.com/app/Public/ViewLearningPathDetails?lpId=111465
Regards,Jesse